• silver/grey embroidered DHI logo on durable black twill fabric
• 3″x3" (7.6cmx7.6cm)
• 26% cotton, 74% polyester
• Attachment options: iron-on, sew-on, or safety pin

Iron-On Instructions:

• 1. Choose the item which you will be ironing the patch onto. Fabrics like denim and cotton provide the best base for iron-on patches.
• 2. Lay your item on a flat, heat-resistant surface.
• 3. Heat up the iron to the hottest setting your fabric can tolerate. Make sure the "steam" option is turned off.
• 4. Iron the place where you plan to place the patch.
• 5. Place a thin garment over the patch.
• 6. Position the heated iron over the garment that you placed over the patch and press down firmly for about 25 seconds on each side (front & back).
• 7. Remove the iron and allow the patch to cool.
• 8. Check to see whether the patch is fixed on securely by gently rubbing at the edge with a finger. If it lifts up a bit, repeat the process.
• 9. For additional attachment strength, use a sewing machine or a needle and thread to secure the patch to the fabric.

Full adhesiveness will be achieved in 48 hours.